✖
✖
VANEOX® 25t electric
Easy to operate at high throughput – ideal for WD-XRF.
Overview
The pressing of a sample into a pressed pellet using a professional press is a common way to prepare a sample in XRF.
While it is less precise than fusion, it is a faster and cost-effective way to prepare a sample.
VANEOX® presses offer a large range of high-quality presses that are suitable for every area of application.
The VANEOX 25t Press ELECTRIC is designed for efficient and repeatable pressing with automatic operation and a maximum pressure of up to 25 tons. As a high-throughput model, it is ideal for WD-XRF analysis, delivering consistent and reliable results. Experience effortless operation with this powerful and reliable press.
Features
Key characteristics
- Electrical pressure build-up
- 25t pressing force
- High sample throughput
Applications
- Accessories for all kinds of applications
- Application support by our FLUXANA laboratory
- Large selection of pressing tools
Service
- Fast expert laboratory and international service team support
- Installation and maintenance online courses
Maintenance
- Low-maintenance and durable
- High-quality workmanship
- Long-term spare parts supply
Comfort
- Low space requirement
- Compact
- Table-top device
Highlights
PRODUCT ACCESSORIES
Aluminium cups
✖
Aluminium cups
Alu cups are used to stabilize your sample from 2 sides. However, for successful use, the sample must show at least some binding properties. Other advantages of this method include the possibilities for labeling and intake with autosamplers.
Binder
✖
Binder
BOREOX® is a direct replacement for boric acid, which has been classified as harmful to health. This is a harmless organic material that shows excellent binding properties and high resistance to X-rays. It is particularly good when used as a backing material.
Alternatively, CEREOX® can be used. CEREOX® is comprised of a wax, previously known as Hoechst wax. This material is clean and very resistant to X-rays. Mixed with a sample (1 part wax to 4 parts sample), CEREOX® forms a perfect pellet with any material.
CELLEOX® is a cellulose based binder. The binding properties are not as good as BOREOX® and CEREOX®. Therefore, it is mainly used as a grinding aid but it is also available as grinding aid tablets. CELLEOX® is excellent at absorbing multiphase liquids or liquids with particles.
Mixer
✖
Mixer
Mixer with variable speed control: 0-3000 rpm, powerful 30 watt motor, continuous or touch activation and shock-absorber feet
Dimensions: 145 x 175 x 140 mm (W x D x H), Weight: 1.9 kg; Power AC 220/230 V, 50/60 Hz or 110/120 V, 50/60 Hz
Pressing rings
✖
Pressing rings
Rings are used in automatic as well as manual sample processing. They are suitable for stabilizing the sample.
Pressing dies
✖
Pressing dies
The pressing dies with 32 and 40 mm are commonly used in pressing samples for XRF and XRD analysis and many other industrial applications. In addition, FLUXANA can produce dies with diameters between 8 and 55 mm. All dies are equipped with nitrile O-ring seals and 2 pellets between which the sample is pressed.
Storage
✖
Storage
It is important to keep samples prepared as beads or pellets in a dust free and dry environment. There is a wide range of boxes and containers for single or multiple samples and standards for XRF.
Pellet films
✖
Pellet films
Pellet fi lms prevent contamination and sticking of the sample and facilitate cleaning of the pressing tool.
